Different Types of Warehouse Racking

Warehouse Rack also referred to as pallet racking and shelving warehouse is a modern method of storage that takes advantage of horizontal space to increase capacity for skladište.Skladište is basically a set of shelves in an upright frame that goes as high as a warehouse krov.Skladištenje items are then arranged on the shelves, and thus increases the storage capacity of the warehouse. Model storage rack also ensures that your warehouse is well managed and properly equipped with enough light passes through the open shelves. Audit and stock take is made ​​much easier and you can easily implement different storage parameters such as LIFO and FIFO stock control, re-order level monitoring and easy loading and unloading of storage items.

Warehouse shelves can be designed in different ways, depending on the item is anticipated to be pohranjena.Različite types of policies are detailed below.

Roll Form selective pallet racks

Selective pallet racking is the most common type of rack, and that includes the load beam is placed on the frame uspravno.Grede therefore a form of insurance to which items are učitava.Role form pf warehouse shelves has tear drop hole in the upright frame in which the beams were drunk na.Vijak of beams is a clip to tears rupu.Isječak can be easily adjusted with tears a hole for adjusting the beam either up or down. This allows this type of set-up that is easily adapted to store different size items. However, the clip of the model is weaker than the structural model of the screw.

Bolt-in selective pallet racks

The screw-in type storage rack beams are attached to the upright beans using permanent bolting. This makes the beam more permanent structure and is easily adjustable to increase the beam size. Therefore, it is ideal for storing a standard type of material or product. Since the screw is stronger, it can also be used to store a lot harder material compared to pelleting foll format.

and a drive through facility in Pallet Racking arrangement

This range of design are to allow any truck to drive or ride through the warehouse with ease. Driving through the warehouse shelves with one entry point for the storage and exit point at the far other side skladište.Viličari will therefore drive through. This is especially ideal for storage FIFO. On the other hand, the disc is the one door for entry and exit and is therefore ideal for Filo.

to push back design

to push back rack storage method is to design storage shelves, which includes having a beam that is slightly inclined upward toward the front (loading) points. In this way, materials or loaded by forklift truck and slide down the air, the farthest part of the area. This allows for maximum load space as they sit side by rame.Dizajn also reduces labor pushing the material to each other as gravity pulls the load towards the base snopa.Dizajn is especially ideal for FIFO method as you can have a discharge at the lower end (the other extreme end) beam. However, Philo is also possible when the load and solve the same point.

Pallet Flow Design

pallet flow storage shelf design is a complex of fences and rolls the air that moves load limit depth zrake.Sustav braking capability and the load can be hung on the rails as opposed to them the rest of the beams.